Vented Rack Shelf, 1 Space, For 18C875

hey I'm Bob and I like to make stuff today I'm going to show you how to make this floating coat rack this whole project was made out of 3/4 inch birch plywood I started by cutting a piece to 36 by 10 then I cut down some other scraps to 5 inches I used that piece to set up a stop block so I could accurately cut the end pieces then I had to trim down a piece that would fit inside of my box it'll make sense in just a minute I dry fit everything together to make sure it was all cut correctly and it fit nice and tight then I drew a reference line along the bottom of the shelf this line showed me the area that it was safe to cut out I left some space on the sides and then I cut out the area for the French cleat I trimmed down this piece to make sure that it would fit in that opening once everything was put together and then I set the blade to a 45 degree angle and basically cut it in half th