Description
Package contents:
Information
- 4 x Load cell 0-50KG
- 1 x HX711 24BIT Precision ADC Module on breakout board
- 10 x Breakaway header pins for HX711 connection
Information
- Load cell - Sturdy steel construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-50kg (0-100 lb).
- HX711 - This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any microcontroller (like an Arduino or Raspberry Pi).
- Load cell specs:
-300 mm (12 in) wire leads pre-attached
-Dimensions 7.8 mm high, 34 mm wide, 45 mm long - HX711 specs:
-Operation Voltage: 2.7V-5V
-Operation Current: < 1.5mA
-Mounted on breakout board
-Includes breakaway headers for connection, soldering required
- https://www.instructables.com/id/Arduino-Bathroom-Scale-With-50-Kg-Load-Cells-and-H/
- https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide
- https://github.com/aguegu/ardulibs/tree/master/hx711
- HX711 datasheet: https://cdn.sparkfun.com/datasheets/Sensors/ForceFlex/hx711_english.pdf
- https://www.youtube.com/watch?v=nGUpzwEa4vg
Degraw - 4 pcs 50kg Load Cells and HX711 Combo Pack Kit | Load Cell Amplifier ADC Weight Sensor for Load Cell Arduino | Bathroom Scale kit
Price is below average
Current Price
$12.99
Average
$14.53
Min Price
$10.99
Max Price
$16.99
Price dynamics
11%
Description
Package contents:
Information
- 4 x Load cell 0-50KG
- 1 x HX711 24BIT Precision ADC Module on breakout board
- 10 x Breakaway header pins for HX711 connection
Information
- Load cell - Sturdy steel construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-50kg (0-100 lb).
- HX711 - This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any microcontroller (like an Arduino or Raspberry Pi).
- Load cell specs:
-300 mm (12 in) wire leads pre-attached
-Dimensions 7.8 mm high, 34 mm wide, 45 mm long - HX711 specs:
-Operation Voltage: 2.7V-5V
-Operation Current: < 1.5mA
-Mounted on breakout board
-Includes breakaway headers for connection, soldering required
- https://www.instructables.com/id/Arduino-Bathroom-Scale-With-50-Kg-Load-Cells-and-H/
- https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide
- https://github.com/aguegu/ardulibs/tree/master/hx711
- HX711 datasheet: https://cdn.sparkfun.com/datasheets/Sensors/ForceFlex/hx711_english.pdf
- https://www.youtube.com/watch?v=nGUpzwEa4vg
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
