- HomeIndustrial & ScientificAdditive Manufacturing Products3D Printer Parts & Accessories3D Printer Controllers
Description
SKR motherboard parameters:
Appearance size: 110*85mm
Installation size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, etc., can be externally connected to the motor drive
Drive mode support: TMC2130SPI, TMC2208UART
Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance)
Display: 2.8-inch TFT, 3.5-inch TFT, LCD2004, LCD12864
Precautions:
1. Motherboard 5V SEL must be connected to both INT and +5V pins for printing (ieMust have 12V-24V power supply to power the motherboard to print);
2. The power of the hot bed connected to the motherboard must be less than or equal to 144W (ie, the thermal bed resistance is greater than 1)
Ω), if a high-power hot bed is used, the hot bed power expansion board must be externally connected;
3. The firmware file name in the SD card cannot be changed (including capitalization);
4. The wiring process and the plug-in drive process must be carried out under the premise of power failure, inspecting the line
After the correct connection and the driver are correctly inserted, the power can be turned on to prevent the wrong line from being connected, causing the motherboard and the driver to be Burned down, causing unnecessary losses;
5. To replace the configuration file, please back up the factory configuration file to record the parts.
Chip pin number and then make changes to the new profile!
Appearance size: 110*85mm
Installation size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, etc., can be externally connected to the motor drive
Drive mode support: TMC2130SPI, TMC2208UART
Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance)
Display: 2.8-inch TFT, 3.5-inch TFT, LCD2004, LCD12864
Precautions:
1. Motherboard 5V SEL must be connected to both INT and +5V pins for printing (ieMust have 12V-24V power supply to power the motherboard to print);
2. The power of the hot bed connected to the motherboard must be less than or equal to 144W (ie, the thermal bed resistance is greater than 1)
Ω), if a high-power hot bed is used, the hot bed power expansion board must be externally connected;
3. The firmware file name in the SD card cannot be changed (including capitalization);
4. The wiring process and the plug-in drive process must be carried out under the premise of power failure, inspecting the line
After the correct connection and the driver are correctly inserted, the power can be turned on to prevent the wrong line from being connected, causing the motherboard and the driver to be Burned down, causing unnecessary losses;
5. To replace the configuration file, please back up the factory configuration file to record the parts.
Chip pin number and then make changes to the new profile!
BIGTREETECH SKR V1.3 32-bit Smoothieware Controller Panel for 3D Printer Compatible 12864LCD / Support A4988 / 8825 / TMC2208 / TMC2100 Driver with USB Cable
Price is below average
Current Price
$21.98
Average
$25.94
Min Price
$21.98
Max Price
$39.54
Price dynamics
15%
Description
SKR motherboard parameters:
Appearance size: 110*85mm
Installation size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, etc., can be externally connected to the motor drive
Drive mode support: TMC2130SPI, TMC2208UART
Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance)
Display: 2.8-inch TFT, 3.5-inch TFT, LCD2004, LCD12864
Precautions:
1. Motherboard 5V SEL must be connected to both INT and +5V pins for printing (ieMust have 12V-24V power supply to power the motherboard to print);
2. The power of the hot bed connected to the motherboard must be less than or equal to 144W (ie, the thermal bed resistance is greater than 1)
Ω), if a high-power hot bed is used, the hot bed power expansion board must be externally connected;
3. The firmware file name in the SD card cannot be changed (including capitalization);
4. The wiring process and the plug-in drive process must be carried out under the premise of power failure, inspecting the line
After the correct connection and the driver are correctly inserted, the power can be turned on to prevent the wrong line from being connected, causing the motherboard and the driver to be Burned down, causing unnecessary losses;
5. To replace the configuration file, please back up the factory configuration file to record the parts.
Chip pin number and then make changes to the new profile!
Appearance size: 110*85mm
Installation size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, etc., can be externally connected to the motor drive
Drive mode support: TMC2130SPI, TMC2208UART
Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance)
Display: 2.8-inch TFT, 3.5-inch TFT, LCD2004, LCD12864
Precautions:
1. Motherboard 5V SEL must be connected to both INT and +5V pins for printing (ieMust have 12V-24V power supply to power the motherboard to print);
2. The power of the hot bed connected to the motherboard must be less than or equal to 144W (ie, the thermal bed resistance is greater than 1)
Ω), if a high-power hot bed is used, the hot bed power expansion board must be externally connected;
3. The firmware file name in the SD card cannot be changed (including capitalization);
4. The wiring process and the plug-in drive process must be carried out under the premise of power failure, inspecting the line
After the correct connection and the driver are correctly inserted, the power can be turned on to prevent the wrong line from being connected, causing the motherboard and the driver to be Burned down, causing unnecessary losses;
5. To replace the configuration file, please back up the factory configuration file to record the parts.
Chip pin number and then make changes to the new profile!
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products