Description

The TMC2130 is a high performance 2-phase stepper motor driver chip with standard SPI interface and simple step / dir interface.

※Product features:

※1. Up to 256 subdivisions;

※2. Supports SPI interface control.

※3. Do not lose step when operating under high load.

※4. Logic voltage: 3.3V / 5V.

※5. Input voltage range: 12V / 24V DC.

※6. Motor operating current 1.2a (peak 2A) can be adjusted

※7. Spread cycle ensures that the stepper motor makes a smooth transition without dead band current when passing through zero.
The TMC2130 stepper motor driver chip has almost no jitter.

※8.StealthChop can drive the motor to work under extremely quiet sound, so it can be controlled.
The noise of the motor is below 10dB, which is much lower than that of the traditional current controller Type;

☞note:

※(1) When selecting SPI operation mode for hardware, please use soldering iron carefully to avoid burns.
After processing, observe carefully whether there is residual tin residue in the module,
and clean it up to prevent short-circuit and burning of the module;
※(2) Please pay attention to the wire sequence and IO port when wiring.
If the wrong wire is connected, the drive will not work.

Connect them as shown above carefully .

※(3) When the driver is inserted into the motherboard, please pay attention to see the direction of the drive,
can not be inserted in reverse, to prevent the drive from burning;
※(4) Be sure to do a good job before driving heat dissipation work (heat sink + fan),
to prevent the drive is not working properly

☞If you have problems within using,pls do not hesitate to contact with us.
we will reply ASAP.
thank you for choosing BIGTREETECH Product, thank you!

BIGTREETECH TMC2130 V3.0 SPI Stepper Motor Driver Silent 3D Printer Parts for SKR V1.3 MKS GEN L Controller Board (4pcs)

Current Price

$33.98

Average

$33.98

Min Price

$33.98

Max Price

$33.99

Price dynamics

0%

Description

The TMC2130 is a high performance 2-phase stepper motor driver chip with standard SPI interface and simple step / dir interface.

※Product features:

※1. Up to 256 subdivisions;

※2. Supports SPI interface control.

※3. Do not lose step when operating under high load.

※4. Logic voltage: 3.3V / 5V.

※5. Input voltage range: 12V / 24V DC.

※6. Motor operating current 1.2a (peak 2A) can be adjusted

※7. Spread cycle ensures that the stepper motor makes a smooth transition without dead band current when passing through zero.
The TMC2130 stepper motor driver chip has almost no jitter.

※8.StealthChop can drive the motor to work under extremely quiet sound, so it can be controlled.
The noise of the motor is below 10dB, which is much lower than that of the traditional current controller Type;

☞note:

※(1) When selecting SPI operation mode for hardware, please use soldering iron carefully to avoid burns.
After processing, observe carefully whether there is residual tin residue in the module,
and clean it up to prevent short-circuit and burning of the module;
※(2) Please pay attention to the wire sequence and IO port when wiring.
If the wrong wire is connected, the drive will not work.

Connect them as shown above carefully .

※(3) When the driver is inserted into the motherboard, please pay attention to see the direction of the drive,
can not be inserted in reverse, to prevent the drive from burning;
※(4) Be sure to do a good job before driving heat dissipation work (heat sink + fan),
to prevent the drive is not working properly

☞If you have problems within using,pls do not hesitate to contact with us.
we will reply ASAP.
thank you for choosing BIGTREETECH Product, thank you!

According to the data, price will be lower in next two weeks, so not waste your money and track better price!

Similar products

Dolity 15A 400W DC 5V-36V Large Power Mosfet MOS FET Trigger Switch Driver Module

Dolity 15A 400W DC 5V-36V Large Power Mosfet MOS FET Trigger Switch Driver Module

BIGTREETECH TMC2209 V1.2 Stepper Motor Driver 2.8A Peak Driver 3D Printer Parts for SKR V1.3 SKR PRO V1.1

BIGTREETECH TMC2209 V1.2 Stepper Motor Driver 2.8A Peak Driver 3D Printer Parts for SKR V1.3 SKR PRO V1.1

Kingprint TMC2208 V2.1 Stepper Damper with Heat Sink Driver, Replacement Damper for A4988 DRV8825 for 3D Printer (4 Pieces)

Kingprint TMC2208 V2.1 Stepper Damper with Heat Sink Driver, Replacement Damper for A4988 DRV8825 for 3D Printer (4 Pieces)

BIGTREETECH TMC2130 V3.0 SPI Stepper Motor Driver Silent 3D Printer Parts for SKR V1.3 MKS GEN L Controller Board (4pcs)

BIGTREETECH TMC2130 V3.0 SPI Stepper Motor Driver Silent 3D Printer Parts for SKR V1.3 MKS GEN L Controller Board (4pcs)

TL Smoother Addon Module, BCZAMD TL Smoother Kit Signal Filter Stabilizer Module for Pattern Elimination Motor Clipping Filter 3D Printer Stepper Motor Drivers Terminator Reprap MK8 I3 Ender 3, 4Pcs

TL Smoother Addon Module, BCZAMD TL Smoother Kit Signal Filter Stabilizer Module for Pattern Elimination Motor Clipping Filter 3D Printer Stepper Motor Drivers Terminator Reprap MK8 I3 Ender 3, 4Pcs

SMAKN® Motor/Stepper/Servo/Robot Shield for Arduino I2C V2 Kit W/ PWM Driver

SMAKN® Motor/Stepper/Servo/Robot Shield for Arduino I2C V2 Kit W/ PWM Driver

Wendry 3D Printer Expansion Board Kit, CNC Shield V3 Engraving Machine Expansion Board Kit, CNC Shielding Plate + DRV8825 Stepper Motor Driver and Heatsink

Wendry 3D Printer Expansion Board Kit, CNC Shield V3 Engraving Machine Expansion Board Kit, CNC Shielding Plate + DRV8825 Stepper Motor Driver and Heatsink

BIGTREETECH DIRECT TMC5160 V1.2 SPI Stepper Motor Driver 4.4A High Power Mute Driver 3D Printer Parts for SKR V1.3 PRO Control Board VS TMC2130 SPI

BIGTREETECH DIRECT TMC5160 V1.2 SPI Stepper Motor Driver 4.4A High Power Mute Driver 3D Printer Parts for SKR V1.3 PRO Control Board VS TMC2130 SPI

BIGTREETECH 3D Printer Part Stepstick Mute TMC2208 V3.0 Stepper Motor Driver with Heatsink for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board(Pack of 5pcs) (Step/DIR Mode)

BIGTREETECH 3D Printer Part Stepstick Mute TMC2208 V3.0 Stepper Motor Driver with Heatsink for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board(Pack of 5pcs) (Step/DIR Mode)

BIGTREETECH TFT24 V1.1 Touch Screen Display Compatible 12864LCD 3D Printer Parts VS MKS TFT2.4 for SKR PRO SKR V1.3

BIGTREETECH TFT24 V1.1 Touch Screen Display Compatible 12864LCD 3D Printer Parts VS MKS TFT2.4 for SKR PRO SKR V1.3

KINGPRINT TMC2130 V3.0 Stepper Motor StepStick Mute Silent Driver with Heatsink for 3D Printer Control Board 4 Packs(SPI)

KINGPRINT TMC2130 V3.0 Stepper Motor StepStick Mute Silent Driver with Heatsink for 3D Printer Control Board 4 Packs(SPI)

GeeekPi Pack of 4 TL-Smoother Module Kit with Heatsink & Du-pont Wire for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Controller Terminator

GeeekPi Pack of 4 TL-Smoother Module Kit with Heatsink & Du-pont Wire for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Controller Terminator

OctagonStar DRV8825 Stepper Motor Driver Module 4-layer for 3D Printer Reprap RP A4988(5PCS)

OctagonStar DRV8825 Stepper Motor Driver Module 4-layer for 3D Printer Reprap RP A4988(5PCS)

powerday A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer Reprap (pack of 5 pcs)

powerday A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer Reprap (pack of 5 pcs)

Gowoops 3D Printer Stepper Motor Driver TMC2208 Stepstick Stepper Motor Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps1.4 MKS Gen, 5 Pcs

Gowoops 3D Printer Stepper Motor Driver TMC2208 Stepstick Stepper Motor Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps1.4 MKS Gen, 5 Pcs

WitBot TMC2208 V3.0 Stepper Motor Driver Module with Heat Sink Have UART Mode Compatible with Ramps1.4 or MKS Board SKR V1.3 for 3D Printers(Pack of 5pcs) (UART)

WitBot TMC2208 V3.0 Stepper Motor Driver Module with Heat Sink Have UART Mode Compatible with Ramps1.4 or MKS Board SKR V1.3 for 3D Printers(Pack of 5pcs) (UART)

MybotOnline DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4, 5 Pack

MybotOnline DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4, 5 Pack

BIGTREETECH DIRECT TMC2209 V1.2 Stepper Motor Driver UART VS TMC2208 TMC2130 A4988 SKR V1.3 Pro Control Board 3D Printer Parts Mini E3

BIGTREETECH DIRECT TMC2209 V1.2 Stepper Motor Driver UART VS TMC2208 TMC2130 A4988 SKR V1.3 Pro Control Board 3D Printer Parts Mini E3

BIGTREETECH DIRECT TFT35 E3 V3.0 Touch Screen /12864 LCD Display Control 3.5 inch Support WiFi Modle 3D Printer Parts for SKR V1.3 PRO Mini E3 Ender3 CR-10

BIGTREETECH DIRECT TFT35 E3 V3.0 Touch Screen /12864 LCD Display Control 3.5 inch Support WiFi Modle 3D Printer Parts for SKR V1.3 PRO Mini E3 Ender3 CR-10

BIGTREETECH DIRECT BTT UPS 24V V1.0 Resume Printing While Power Off Module Sensor 3D Printer Parts for SKR V1.3 Mini E3 SKR Pro Ender-3 CR-10

BIGTREETECH DIRECT BTT UPS 24V V1.0 Resume Printing While Power Off Module Sensor 3D Printer Parts for SKR V1.3 Mini E3 SKR Pro Ender-3 CR-10

Witbot DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer RP1.4 A4988(Pack of 5pcs)

Witbot DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer RP1.4 A4988(Pack of 5pcs)

HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino

HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino

AiTrip Drv8825 Stepper Motor Driver with Heatsink for 3D Printer RepRap 4 Ramps 1.4 StepStick

AiTrip Drv8825 Stepper Motor Driver with Heatsink for 3D Printer RepRap 4 Ramps 1.4 StepStick

Organizer 5pcs DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988

Organizer 5pcs DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988

KINGPRINT TL-Smoother Addon Module Filter Module 3D Printer Motor Driver (Pack of 3pcs)

KINGPRINT TL-Smoother Addon Module Filter Module 3D Printer Motor Driver (Pack of 3pcs)

OctagonStar A4988 Driver CNC Shield Expansion Board for Arduino V3 Engraver 3D Printer

OctagonStar A4988 Driver CNC Shield Expansion Board for Arduino V3 Engraver 3D Printer

BIGTREETECH 3D Printer Part UPS 24V V1.0 Printing Power Off Module Sensor Compatible with SKR V1.3 SKR Mini E3 for Ender 3/CR-10 3D Printer

BIGTREETECH 3D Printer Part UPS 24V V1.0 Printing Power Off Module Sensor Compatible with SKR V1.3 SKR Mini E3 for Ender 3/CR-10 3D Printer

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

WillBest 5 Pieces 3D Printer Endstops/Limit Switch/Mechanical Switch for Reprap Prusa I3

WillBest 5 Pieces 3D Printer Endstops/Limit Switch/Mechanical Switch for Reprap Prusa I3

CNC Shield Expansion Board V3.0 + 4Pcs A4988 Stepper Motor Driver for Engraver 3D Printer DC 12V to 36V

CNC Shield Expansion Board V3.0 + 4Pcs A4988 Stepper Motor Driver for Engraver 3D Printer DC 12V to 36V

TMC2208 V1.2 3D Printer Stepper Motor Driver Module, YOTINO with Heat Sink Screwdriver for 3D Printer Mother Boards Reprap MKS Prusa

TMC2208 V1.2 3D Printer Stepper Motor Driver Module, YOTINO with Heat Sink Screwdriver for 3D Printer Mother Boards Reprap MKS Prusa

Aokin TL Smoother Addon Module for Pattern Elimination Motor Filter Clipping Filter 3D Printer Stepper Motor Drivers, 3 Pcs

Aokin TL Smoother Addon Module for Pattern Elimination Motor Filter Clipping Filter 3D Printer Stepper Motor Drivers, 3 Pcs

ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

Dolity 15A 400W DC 5V-36V Large Power Mosfet MOS FET Trigger Switch Driver Module

Dolity 15A 400W DC 5V-36V Large Power Mosfet MOS FET Trigger Switch Driver Module

We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic.
By clicking "Accept All", you consent to our use of cookies.